Q Acoustics

Q Acoustics Concept 300 Speakers with Stands

£2,999
Finish:

By designing both the speaker and stand as a complete package Q Acoustics have been able to redefine the level of performance that’s possible from a smaller loudspeaker.  In combination with the Tensegrity stand the Concept 300 speakers represent a step-change in loudspeaker design and a redefinition of what is possible at its price.

Design

The days of performance being the be-all and end-all of a loudspeaker are long gone. Aesthetic considerations are perfectly valid and, to this end, in the Concept 300 Q Acoustics has designed a high-end, high-performance loudspeaker that’s unshowily sophisticated and able to interact discreetly with any interior design vocabulary.

On the outside, numerous lacquer coats produce a high-quality gloss finish which is combined with real-wood veneers. This results in a cabinet that manages to be clean and understated at the same time as being of obviously high perceived value.

The uncluttered look of the cabinets is further enhanced by innovative drive unit mounting. Both the tweeter and mid/bass driver are fixed, from behind, by strong spring-tensioned retaining bolts which negate the need for any exposed bolt-heads on the speaker face.

At the rear of the speaker, Concept 300 features an over-specified terminal panel which is designed to resist vibrations from the cabinet. It’s equipped for bi-wiring (or bi-amping) via its electrically isolated terminals - these can accept bare wire, spade connectors or 4mm banana plugs.

Cabinet and Stand

Ideally, the only vibrations a loudspeaker produces are the ones required to generate its sound. Of course, it’s not possible to entirely rid a loudspeaker cabinet of unwanted vibrations that can interfere with its performance - but, as Q Acoustics has demonstrated with Concept 300, it is possible to keep cabinet vibrations to an absolute minimum in order to deliver entirely uncorrupted sound.

Q Acoustics uses MDF rather than one of the more glamorous and/or expensive alternatives to construct the Concept 300 cabinet. There are a couple of reasons for this: a) alternative materials offer no benefits in terms of damping, or even ease and simplicity of construction, over the very high performance MDF delivers, and b) more expensive materials simply drive up the eventual price of the speaker for no audio gain whatsoever.

Dual Gelcore™

Having dealt with lower-frequency vibrations using P2P bracing, Q Acoustics then negates higher-frequency cabinet vibrations using its bespoke Dual Gelcore technology.

The Concept 300 cabinet is comprised of three individual layers, each separated by a non-setting gel - the gel acts rather like a high-tech and extremely effective gasket. Any stray high-frequency vibrations are converted into heat which dissipates within the gel.

Tensegrity Stand & Isolation Base System

With a standmounting speaker design like this, of course, the speaker’s relationship with its stand is of fundamental importance. And it’s the design of the new Tensegrity stand, and the new isolation base suspension system that joins Concept 300 to it, that allows Q Acoustics to redefine the level of performance that’s possible from a smaller loudspeaker.

Tensegrity is a tripod - by definition, an extremely stable structure. It’s built It’s built from precision machined stainless steel rods (which are the load-bearing element) and thin stainless steel cables (which maintain the position of the load-bearing rods). The result is an exceptionally rigid and self-supporting structure with a remarkably low surface area and - let’s not pretend otherwise - beautifully elegant appearance. It’s not so much a speaker stand, it’s more an entirely new loudspeaker support concept.

But, of course, it’s of little consequence how efficient your speaker cabinet is, or how ingenious the design of the stand it works from, if the union between the two is unsympathetic or inefficient. Q Acoustics joins Concept 300 speaker to Tensegrity stand with the new isolation base suspension system, which is about as sympathetic and efficient as it gets.

The entire mass of Concept 300 is suspended on the four springs of the newly developed integrated base plate. This isolation base system works in multiple ways: it prevents energy from the speaker leaking into the Tensegrity stand and affecting the sound, it prevents vibrations for the floor making their way from the stands into the speaker, and in every circumstance it provides a rigid coupling between speaker and stand.

Thanks to the combination of Tensegrity stand and isolation base suspension, the performance of Concept 300 is entirely unhindered by internal or external influences.

Driver Units and Crossover

Q Acoustics has taken its proven (and acclaimed) driver technology from the Concept 500 floorstanding speaker and enhanced its performance to perfectly match the requirements of the Concept 300’s smaller cabinet.

The mid/bass driver is a 165mm impregnated/coated paper cone with very low resonance thanks to its high-performance rubber surround. It sits in front of a large (35mm) glass fibre voice coil and equally substantial ferrite magnet. The result is midrange and bass response that’s as punchy and dynamic as it is poised and eloquent.

 

Above it, the 28mm high-frequency driver, made of super-fine strands of coated microfibre, is decoupled from the speaker cabinet using a rubber gasket. This protects the tweeter from sending or receiving unwanted vibrations and allows it to be mounted close to the mid-bass driver. This improves integration with the larger driver - and the very subtle horn-shaped profile to the tweeter’s front plate allows perfect impedance-matching with its environment without colouring performance.

Specification

Concept 300 Speaker

Enclosure type
2 way reflex
Mid/bass driver
165mm
High frequency unit
28mm
Frequency response
55Hz - 30kHz
Nominal impedance
6ohms
Minimum impedance
4.7ohms
Sensitivity
84dB
Stereo Amplifier Power
25-200w
Crossover Frequency
2.5kHz
Effective Volume
11.4L
Dimensions W/H/D
220 x 355 x 400mm
Weight
14.5kg (per speaker)
Carton Dimensions W/H/D
320 x 500 x 520mm
Packaged Weight
16.6kg (per speaker)

Concept 300 Tensegrity Stand

Dimensions W/H/D
492 x 690 x 430mm
Weight
3.9kg (per stand)
Carton Dimensions W/H/D
740 x 780 x 460mm
Packaged Weight
12.3kg (pair)

We have updated our Doug Brady Hi Fi website, which now provides you with automatic real-time stock updates. We believe in an honest approach when displaying the availability of products. When viewing a product listing page, you'll see one of the following stock indicators. 

Stock Information : This item is in stock

This item is brand new and guaranteed in stock from our shop stock or our off site warehouse.

Our shop stock will be dispatched same day including on a Saturday if ordered before 3:00pm or the next working day if ordered after 3:00pm. 

Stock being dispatched from our off site warehouse may take a day longer for you to receive. We may also dispatched directly from the manufacturer or distributor. This is often the case for particularly large or heavy items where specialized service is required. For anything which can take time to get to you, we'll contact you quickly.

In Stock - Free Next Day Delivery*

See our delivery information sheet here

For stock information please call..

Availably to order. Occasionally, due to stock demand, we can sell out. We either have this on order with stock due in or we do not usually have back up stock of this item in store. When you make a purchase, we will inform you quickly when the item is due in from the manufacturer and deliver as soon as it arrives with us. Usually this is only a short wait of 3 - 5 days, we will contact you with a estimated delivery time.

Sold Out

This item is currently sold out with the supplier or manufacturer please call us so we can give you an estimated time. 01925 828009 

In Stock - Free Next Day Delivery*

Free next working day delivery when you spend over £50. We will send you a tracking number where DPD will give a one hour delivery window. Services available Monday to Friday (excluding public holidays) to most mainland UK addresses for in stock items ordered before our cut-off time at 3pm. Terms apply.

Free Saturday delivery when you spend over £500. We will send you a tracking number where DPD will give a one hour delivery window. Services available to most mainland UK addresses for in stock items ordered before our cut-off time on Friday 3pm. Terms apply.

* Excludes CLICK & COLLECT items  Some of our manufactures request for there items not to be sold on line for these items our delivery service may not be available in curtain locations so please call to order 01925 828009

Christmas and New Year Deliveries - (subject to stock availability)

Our last order cut-off time for delivery before Christmas is 12pm on Thursday 23rd December, which will be delivered on Friday 24th December.

Our last order cut-off time for delivery before New Year is 12pm on Thursday 30th December, which will be delivered on Friday 31st December.

Order Date (before the 12pm cut-off time for same day dispatch) Expected Delivery Date
Monday 20th December Tuesday 22nd December
Tuesday 21st December Wednesday 23rd December
Wednesday 22nd December Thursday 24th December
Thursday 23rd December Friday 30th December
Friday 24th December to Tuesday 29th December Wednesday 29th December
Wednesday 29th December Thursday 30th December
Thursday 30th December Friday 31st December
Friday 31st January to Monday 3rd January Wednesday 5th January☨
Normal delivery service resumes from then on.

 

Delivery Costs

Standard next day delivery is free for all orders to most UK mainland addresses. All other delivery prices are determined by the destination, the service chosen and the value and weight of your order. Addresses in the Scottish Highlands, offshore, Northern Ireland & Ireland may incur additional delivery costs, depending on the items ordered. Prices are calculated at the checkout for all services and destinations.

You may also like

Recently viewed