Dali Rubicon LCR Wall mounted Speaker (Single speaker)
Save 20% on the Dali Rubicon Speakers Use code DALI20 at the checkout
The wall-mounted RUBICON LCR is simply born to stand out in both sound performance and design with the hybrid tweeter module and the wood fibre low-loss driver. The compact RUBICON LCR delivers a wide dynamic range, a coherent sound with lots of details all together with a bass response that’s unrivalled in its class.
The rotatable hybrid tweeter module makes it possible to use the RUBICON LCR as either the left or right channel, or as a centre speaker. The 6½ inch woofer uses the ingeniously designed bass port to reach maximum bass depth. With the RUBICON LCR, we promise you a sound performance that will dazzle you and leave you with goose bumps.
In the RUBICON LCR, DALI makes use of both the soft dome tweeter working alone, and the hybrid tweeter configuration an amazing rendering of the high frequencies. The voice coil used in the RUBICON LCR is designed to be very light and agile in order to achieve a broader bandwidth. This lighter voice coil is placed inside a powerful ferrite magnet that keeps a tight control of its movements.
The ribbon tweeter is the master of wide dispersion and combining it with the soft dome, the tweeter module starts working as low as 2.5 KHz. This extreme bandwidth combined with the ultra wide dispersion is an important part of the DALI sound philosophy.
Featuring the same hybrid tweeter and wood-fibre, low-loss driver as there floorstanding RUBICON range, the LCR also boasts an ingenious bass port configuration built into the back panel that uses the wall it is mounted on to extend its acoustic properties and deliver such unrivalled bass response that there maybe no need to add a subwoofer to your setup.
|Frequency Range (+/-3 dB) [Hz]||59 - 34.000|
|Sensitivity (2,83 V/1 m) [dB]||89.0|
|Nominal Impedance [ohms]||4|
|Maximum SPL [dB]||109|
|Recommended Amplifier Power [W]||20 - 150|
|Crossover Frequency [Hz]||3,100 / 14,000|
|Crossover Principle||2 + ½-way|
|Hybrid tweeter module, Super high freq. driver, Quantity||1 x 17 x 45 mm|
|Hybrid tweeter module, Super high freq. driver, Diaphragm type||Ribbon|
|Hybrid tweeter module, High frequency driver, Quantity||1 x 29 mm|
|Hybrid tweeter module, High frequency driver Diaphragm type||Soft Textile Dome|
|Low frequency driver, Quantity||1 x 6½"|
|Low frequency driver, Diaphragm type||Wood Fibre Cone|
|Enclosure type||Bass Reflex|
|Bass Reflex Tuning Frequency [Hz]||49|
|Connection Input||Single Wire|
|Recommended Placement||Centre / Soundbar
|Recommended Distance From Wall [cm]||0 - 30|
|Dimensions With Base (HxWxD) [mm]||468 x 278 x 146|
Micro Fibre Cloth