Dali Rubicon 2C Active Wireless Speakers
Dali Rubicon 2C is a Active wireless stand mounted speaker with a 6 1⁄2 inch low-loss woofer and a 29mm ultra light soft dome tweeter.
The comprehensive and user-friendly setup, designed with a focus on zero- loss, connectivity and convenience, is effort- lessly achieved.
The DALI SOUND HUB is the starting point when setting up RUBICON C speakers. It is the distribution source of the wireless audio signal and where the pairing process begins.
The DALI SOUND HUB houses all the potential connections; has built-in controls for Power On/Off, Volume control, Source select, Mute and Speaker pairing, and also visual indications for Volume, Source and Speaker placement.
The sound hub remote control is connected via Bluetooth, so ensuring optimal performance stability, visual feedback, and ease of operation from distance. Bluetooth also enables the user to place the sound hub anywhere within max 10 meters, preferably in the same room as the speakers.
The RUBICON C system is MQA Certified. By adding the DALI BluOS NPM-1 module to your Sound Hub, you can now take advantage of the ever-growing catalogue of studio master recordings that have been encoded into MQA and streamed on services like Tidal.
DALI SOUND HUB INPUTS
Wireless connection 24 bit / 96 kHz
Bluetooth (AAC, Apt-X and Apt-X HD)
3.5 mm Stereo (mini-jack)
2 x Optical - AUDIO /TV (TosLink)
RCA (Analogue stereo)
DALI SOUND HUB OUTPUTS
Sub-out - LFE type subwoofer output (< 100 HZ)
Pre-out - Line level RCA output (pre-amplifier)
USB Power (5V 1 A output)
to power a device - no playback audio
Plug-in module 1 Plug-in module 2
ALI RUBICON 2 C SPEC
|Product series||RUBICON C|
|Frequency Range (+/-3 dB) [Hz]||46 - 26.000|
|Maximum SPL [dB]||108|
|Crossover Frequency [Hz]||2,600|
|Crossover Principle||Hybrid Full Active 24 bit DSP and Passive all analogue|
|High frequency driver, Quantity||1 x 29 mm|
|High frequency driver, Diaphragm type||Soft Textile Dome|
|Low frequency driver, Quantity||1 x 6½"|
|Low frequency driver, Diaphragm type||Wood Fibre Cone|
|Enclosure type||Bass Reflex|
|Bass Reflex Tuning Frequency [Hz]||51.0|
|Max. Amplifier Power Output [RMS watt]||250|
|Amplifier Type||Discrete Class D (Closed Loop, Self Oscillating)|
|Onboard DAC||Burr Brown PCM1796 (Balanced output)|
|Connection Input||ADC-in (RCA)|
|Wireless Input(s)||Full 24 Bit / 96 kHz (No bit-loss attenuated)|
|Wireless Audio RF Band [MHz]||5725-5875 MHz|
|Max. Digital Resolution [bits/KHz]||24 / 96|
|Recommended Placement||Shelf or stand|
|Recommended Distance From Wall [cm]||20 - 120|
|Max. Power Consumption [W]||325|
|Standby Power Consumption [W]||1.2|
|Dimensions With Base (HxWxD) [mm]||353 x 195 x 335|
Micro Fibre Cloth
|Input Sensitivity [mV]||1,400|
|Input Impedance RCA [Ω]||5k|
|Input Mains Voltage [Volts]||Universal mains 100 - 240V|