Dynaudio

Dynaudio Emit 30 Floorstanding Speakers

£1,299.00

Stock Availability : Only 1 left in stock.

Save 25% on Dynaudio Emit Speakers until 30th November 22

Emit 30 is perfect for larger stereo systems or compact multi-channel home cinema set-ups in medium to large rooms.

If you’re looking for a little more power from your system, you’ve found it. The Dynaudio Emit 30 is a compact two-and-a-half-way speaker designed to impress whether it’s used as a stand-alone stereo pair or as part of a 5.1-channel (or more) home cinema.

Like its little brother, Emit 10, it uses 14cm MSP woofers similar to those used in the Evoke series – this time doubled-up in each speaker for more low-frequency muscle, plus midrange clarity and punch. MSP stands for Magnesium Silicate Polymer. It’s a material we developed in-house for our woofer cones, and have used for decades – including on our most-lauded high-end models. MSP provides precisely the right combination of lightness, stiffness and damping (one we’ve tuned and honed over the years) to deliver control and outright power exactly where it’s needed.

Premium woofer technology

The cones are moulded in one piece; we don’t use a separate glued dust-cap. The little balance ribs around the edge of the centre are bonded directly to the voice-coil behind it, making the whole motor assembly one solid piece. Using fewer moving parts gives our engineers fine control over how the speaker moves – which, in turn, means fine control over how it performs. You’ll hear it as strong, tight bass and startlingly clear vocals, guitars and more. Even at eyebrow-raising volume.

Each woofer is powered by a dual-stacked strontium carbonite Ferrite+ ceramic magnet system. Using two magnets means we can more effectively direct where the magnetic energy goes – it’s a lesson we learned developing the award-winning Special Forty anniversary series, and it’s thrilling to be able to use it in our entry-level family.

The target for all that flux is the voice-coil. We use aluminium windings in Emit 30. Aluminium is light (which minimises inertia on the cone’s back-and-forth movement), and because it’s lighter than copper wire, it means we can pack more windings on to the two-layer glass-fibre former. More windings equals more power, and greater control over fine movement. There’s a twist, though (please pardon the pun): we’ve coated the aluminium wire in a very thin copper coating to further increase the control the amplifier has on the voice-coil. More force with only a fractional weight gain: win-win.

High-performance Cerotar tweeter

While the twin 14cm mid/bass units deal with the… well, midrange and bass… the upper frequencies are handled by the tweeter. Emit might be an ‘entry-level’ speaker, but we certainly haven’t used any old unit off the shelf; witness the incredible Cerotar tweeter (the same as we use in Evoke). It’s based on the Esotar Forty anniversary tweeter and the Esotar Pro found in our Core studio reference speakers, and must be heard to be believed.

The 28mm coated soft-dome diaphragm is backed up by the clever Hexis inner dome. The playing surface has been specifically engineered to produce ultra-clear, ultra-detailed high-frequencies without breakup (even at high volumes), while the Hexis smooths the airflow behind it to reduces unwanted resonances. An aluminium voice-coil and airflow magnet system provide the power. Cerotar is designed for high performance without listener fatigue – perfect if you’re given to long listening sessions (and you’re music lovers, so we bet you are).

The bass-port on the back panel has dual flares (one inside; one outside), and has been tuned to minimise unwanted ‘chuffing’. It’s supplied with foam inserts that can be used to optimise performance for the speaker’s position relative to the wall.

Danish-designed cabinetry

Emit 30’s cabinets are made from 18mm MDF to provide a solid, stable platform for the drivers to do their work. They’re internally damped with polyester fibre, measured down to the gram for exactly the right amount of resonance suppression.

On the outside, you can choose from three custom laminate finishes: Black, White or Walnut. They’ve been chosen to complement any room, in any configuration (so if you’re mixing and matching Emit speakers in a home cinema system, you can make them stand out or blend in as you want).

Emit 30: powerful floorstander performance in a compact package. If you want to take your listening to the next level, they’ll really make your collection sing.

Technical specifications


Sensitivity: 87dB (2.83V/1m)
IEC power handling: 180 watt
Impedance: 4 Ω
Frequency response (± 3 dB): 44Hz - 25kHz (-6 dB 39 Hz - 35 Khz)
Box principle: 2 X Bass reflex rear double flared port
Crossover: 2.5-way
Crossover frequency: 1000/3550Hz
Crossover topology: 1ST order tweeter / 2nd order woofer
Specification sheet for Emit part 1
Midrange / Woofer: 14 cm MSP
Woofer: 14 cm MSP
Tweeter: Cerotar soft dome with Hexis
Weight: 15.53 kg / 34.2 lb
Dimensions (W x H x D): 170 X 900 X 271,5 mm
  6.7 X 35.4 X 10.7 in
Dimensions with feet/grille (W x H x D): 267,5 X 946,5 X 335,4 mm
  10.5 X 37.3 X 13.2 in

We are in the process of updating our Doug Brady Hi Fi website, which now provides you with automatic real-time stock updates. .

When viewing a product listing page, click on the option/colour of the product you require then you'll see one of the following stock indicators.

Stock Information : We have (this number of your chosen variant) in stock. 

In Stock - Order Now - Delivered free to you on [delivery-date] 

This item is brand new and guaranteed in stock from our shop stock.
Our shop stock will be dispatched on the date displayed on the product page, delivery will be booked for the delivery date displayed. We will send you a DPD tracking number where you will be given a 1 hour time slot on the day of delivery. 

 

In Stock - 2-3 day Dispatch - Delivered to you FREE by  [delivery-date] 

This item is brand new and in stock at our off site warehouse.
Stock being dispatched from our off site warehouse may take a day or two longer for you to receive. We may also dispatched directly from the manufacturer or distributor. This is often the case for particularly large or heavy items where specialized service is required. For anything which can take time to get to you, we'll contact you quickly.

Available to Order - ☎ - 01925 828009

Availably to order. Occasionally, due to stock demand, we can sell out. We either have this on order with stock due in or we do not usually have back up stock of this item in store. When you make a purchase, we will inform you quickly when the item is due in from the manufacturer and deliver as soon as it arrives with us. Usually this is only a short wait of 3 - 5 days, we will contact you with a estimated delivery time.

Sold Out

This item is currently sold out with the supplier or manufacturer please call us so we can give you an estimated time. 01925 828009 

Available*

Some manufacturers request we do not sell Items online so these items are only available to collect from our store.

In Stock - Free Next Day Delivery*

Free next working day delivery when you spend over £75. We will send you a tracking number where DPD will give a one hour delivery window. Services available Monday to Friday (excluding public holidays) to most mainland UK addresses for in stock items ordered before our cut-off time at 3:30pm. Terms apply.

Free Saturday delivery when you spend over £375. We will send you a tracking number where DPD will give a one hour delivery window. Services available to most mainland UK addresses for in stock items ordered before our cut-off time on Friday 3pm. Terms apply.

* Excludes CLICK & COLLECT items  Some of our manufactures request for there items not to be sold on line for these items our delivery service may not be available in curtain locations so please call to order 01925 828009

Delivery Costs

Standard next day delivery is free for all orders to most UK mainland addresses. All other delivery prices are determined by the destination, the service chosen and the value and weight of your order. Addresses in the Scottish Highlands, offshore, Northern Ireland & Ireland may incur additional delivery costs, depending on the items ordered.

You may also like

Recently viewed