Ortofon Cadenza Bronze Moving Coil Cartridge
At Ortofon we constantly look for new technology to be used in our products and push the performance of existing technology. Thus we assure the highest level of performance and quality. Ortofon decided to develope a new cartridge series that is even more ambitious.
By carefully implementing cobalt-iron pole pieces, new improved winding process on the armature, using extruded aluminium housing in the models as well as other changes, we have been able to reveal new possibilities in performing the analogue information. It was also decided to make a more complete range of cartridges, which meant an introduction of a moving coil Cadenza Mono model to support our customers, who have an extended interest in micro groove mono records.
The Five Cadenza Series Cartridges
- MC Cadenza Red delivers open, dynamic sound with a touch of warmth
- MC Cadenza Blue adds more dynamics and resolution, sounds more open and reproduces more details
- MC Cadenza Bronze adds even more details and resolution but in a very evenhanded way that pays respect to all elements
- MC Cadenza is the best of everything, true to the groove with resolution and accurate insight into each recording
Cadenza Bronze
The Cadenza Bronze model is using a Replicant 100 stylus and a conical aluminium cantilever. The coil wire is the famous Ortofon Aucurum wire, which is a gold plated 6NX copper wire. Field Stabilizing Element/FSE, is used for optimal linearity especially during complex crescendo passages. Cadenza Bronze stereo imaging capabilities illuminate the farthest corners of the soundstage in all three dimensions.
Specifications
| Output Voltage At 1000 Hz, 5 cm/sec.: | 0.4 mV |
| Channel Balance At 1 kHz: | < 1 dB |
| Channel Separation At 1 kHz: | > 24 dB |
| Channel Separation At 15 kHz: | > 20 dB |
| Frequency Range At -3 dB: | 20 – 55 kHz |
| Frequency Response 20 Hz – 20 kHz: | ±1.5 |
| Tracking Ability At 315 Hz At Recommended Tracking Force:* | 80 µm |
| Compliance, Dynamic, Lateral: | 12 µm/mN |
| Stylus Type: | Nude Ortofon Replicant on conical aluminium cantilever |
| Stylus Tip Radius: | r/R 5/100 µm |
| Tracking Force Range: | 2.2 – 2.7 g (22–27 mN) |
| Tracking Force, Recommended: | 2.5 g (25 mN) |
| Tracking Angle: | 23° |
| Internal Impedance, DC Resistance: | 5 ohm |
| Recommended Load Impedance: | 50–200 ohm |
| Cartridge Body Material: | Stainless steel / aluminium |
| Cartridge Colour: | Bronze / black |
| Cartridge Weight: | 10.7 g |
Payment & Security
We value your privacy. Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.