Michi P5 with M8 (Pre + Power Monoblock Amplifiers)
Couldn't load pickup availability
Free Pallet Delivery
Free Pallet Delivery
Returns Policy
Returns Policy
Michi P5 with M8 (Pre + Power Monoblock Amplifiers)
Michi P5 Pre-Amp
Introducing the Michi P5 Series 2 Preamplifier, the ultimate choice for music enthusiasts and audiophiles looking for an unmatched audio experience. Custom engineered with twin 8-channel high precision ESS SABRE ES9028PRO Digital to Analog converters specially adapted to MONO mode, the P5 Series 2 provides redundant signal processing by 8 DAC circuits per channel.
This multi-DAC solution is all about performance and extracts exceptional details and nuances of the music presented on an exceptionally wide sound stage. Dual shielded, in-house manufactured toroidal transformers drive 16 independent power supplies isolating all critical circuits. The result is an ultra-quiet noise floor and extremely low distortion levels.
The breathtaking performance of the Michi P5 Series 2 immerses you in your music like never before, precisely rendering every note and enveloping you in sound. The Michi P5 Series 2 connects to all your favourite music sources including analogue RCA and XLR balanced inputs, moving magnet and moving coil phono, aptX HD wireless Bluetooth, and coaxial and optical digital inputs. The PC-USB input supports PCM (32-bit 384kHz) and Quad DSD (11.2MHz) music files, along with full MQA hardware decoding up to 24-bit 384kHz.
The elegant, understated industrial design of the Michi P5 Series 2 is manufactured to the highest standards of quality, befitting its flagship position in the Michi range. A high-resolution graphic display, front panel controls, IR remote, and headphone output ensure easy setup and operation. RS232 and Ethernet connectivity support all popular control systems. The Michi P5 Series 2 preamplifier continues to deliver on the Michi promise of acoustic elevation for even the most discerning audiophiles. Michi, expectations amplified.
Michi M8 Monoblocks
The stunning control and authoritative power of the Rotel Michi M8 Monoblock Amplifier is the result of a perfect balance of science meets art delivering 1,080 watts of Class AB power into 8 ohms and an astounding 1,800 watts to the most demanding 4 ohm loudspeakers.
The M8 is powered by a pair of custom engineered, low noise, in-house manufactured toroidal transformers supported by 4 British patented slit foil, high efficiency, low ESR bulk storage capacitors for impactful bass with exceptional control under extreme loading conditions.
To achieve accuracy and its unsurpassed performance, the M8 is equipped with an array of 32 high current output transistors thus reducing the load on individual components and maintaining the crucial energy, rhythm and timing throughout the amplification stages. Musical expression and detailed refinement were further accomplished through acoustic tuning of all critical components and a balanced circuit design.
A high resolution display adorns the front panel supporting a peak power meter or spectrum analyzer. With XLR and RCA inputs, 2 sets of custom Michi speaker binding posts, remote control and fully featured RS232 and Ethernet connections the M8 provides ultimate installation flexibility. Power amplification at its best in the most elegant of industrial designs.
Michi P8 Specifications
| Total Harmonic Distortion: | <0.002% (20 Hz–20 kHz) |
| Intermodulation Distortion: | <0.002% (60 Hz : 7 kHz, 4:1) |
| Input Sensitivity / Impedance – Phono (MM): | 2.5 mV / 47 kΩ |
| Input Sensitivity / Impedance – Phono (MC): | 250 µV / 100 Ω |
| Input Sensitivity / Impedance – Line (RCA): | 160 mV / 47 kΩ |
| Input Sensitivity / Impedance – Line (XLR): | 250 mV / 100 kΩ |
| Input Overload – Phono (MM): | 199 mV |
| Input Overload – Phono (MC): | 22 mV |
| Input Overload – Line (RCA): | 12 V |
| Input Overload – Line (XLR): | 12 V |
| Output Level – Line (RCA): | 1 V / 470 Ω |
| Output Level – Line (XLR): | 2 V / 100 Ω |
| Frequency Response – Phono Input: | 20 Hz–20 kHz (0 ±0.3 dB) |
| Frequency Response – Line Inputs: | 10 Hz–100 kHz (0 ±0.3 dB) |
| Tone Control – Bass: | ±10 dB at 100 Hz |
| Tone Control – Treble: | ±10 dB at 10 kHz |
| Signal-to-Noise Ratio – Phono: | 80 dB (IHF “A” weighted) |
| Signal-to-Noise Ratio – Line: | 116 dB (IHF “A” weighted) |
| Channel Separation – Phono: | >55 dB |
| Channel Separation – Line: | >85 dB |
| Digital Frequency Response: | 20 Hz–20 kHz (0 ±0.3 dB max) |
| Digital Signal-to-Noise Ratio: | 100 dB (IHF “A” weighted) |
| Digital Input Sensitivity / Impedance: | 0 dBFS / 75 Ω |
| Digital Output: | 0.75 V peak-to-peak |
| Load Impedance: | 75 Ω |
| Supported Digital Signals: | SPDIF LPCM (up to 192 kHz / 24-bit) |
| PC-USB Support: | USB Audio Class 1.0 (up to 96 kHz / 24-bit); USB Audio Class 2.0 (up to 384 kHz / 32-bit)* |
| Additional Digital Support: | DSD, DoP, MQA, MQA Studio, Roon Tested (*driver required for 32-bit/384 kHz) |
| Power Requirements – Europe: | 230 V, 50 Hz |
| Power Requirements – USA: | 120 V, 60 Hz |
| Power Consumption: | 40 W |
| Standby Power – Normal: | <0.5 W |
| Standby Power – Network Wakeup: | <2 W |
| BTU Rating: | 87 BTU/h |
| Dimensions (W × H × D): | 485 × 150 × 452 mm (19 × 6 × 17 3/4 in) |
| Front Panel Height: | 132 mm (5 1/4 in) |
| Weight (Net): | 22.9 kg (50.5 lb) |
| Finish: | Black |
Michi M8 Specifications
| BTU Rating (4Ω, 1/8th power): | 3200 BTU/h |
| Continuous Power Output: | 1080W/Ch (8Ω) 1800W/Ch (4Ω) |
| Total Harmonic Distortion (THD): | <0.018% |
| Frequency Response: | 20Hz - 20kHz (+0dB, -0.15dB) 10Hz - 100kHz (+0dB, -0.5dB) |
| Gain: | Unbalanced (RCA): 34dB Balanced (XLR): 30dB |
| Dimensions (W × H × D): | 485 × 238 × 465mm (19" × 9.375" × 18.25") |
| Front Panel Height: | 220mm (8.625") |
| Power Requirements: | 120V, 60Hz |
| Power Consumption: | 1200W |
| Standby Power Consumption: | 1200W |
| Net Weight: | 59.1kg (130.3lbs.) |
Payment & Security
We value your privacy. Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.