New Generation Grand Class Turntable
The Technic SL-1300G turntable is designed with a Hi-Fi focus, featuring Technics' advanced ΔΣ-Drive motor technology. This new system enhances rotational accuracy and minimises vibrations, resulting in superior sound quality. Key elements contributing to this performance include the coreless direct-drive motor and a three-layered platter, combined with a high-rigidity chassis.
Motor and Construction
The turntable's coreless direct-drive motor is notable for eliminating cogging, which can cause uneven rotation. The motor's twin-rotor design reduces bearing load and maintains high torque while minimising minute vibrations.
The motor has been specially redesigned to avoid subtle vibrations that might impact sound quality. For increased rigidity, the motor's coil mounting base uses the same reinforcement pattern as the high-end SL-1000R/SP-10R models.
ΔΣ-Drive Technology - Delta Sigma Drve
The ΔΣ-Drive system represents the pinnacle of Technics' expertise in PWM signal processing. This cutting-edge technology reduces harmonic distortions and suppresses motor vibrations, allowing for smoother and more accurate rotation.
This results in more faithful reproduction of audio.
Platter and Vibration Control
The turntable features a three-layered platter made from a combination of brass and aluminium die-cast. It includes a rubber covering on the rear surface to absorb unnecessary resonance. This design not only provides exceptional rigidity and vibration damping but also surpasses the SP-10MK2 in rotational stability and has more than twice the inertial mass of the SL-1200MK5.
Rigidity and Balance
To ensure high rigidity, the SL-1300G employs a body with a two-layered construction uniting BMC and aluminium die-cast chassis. Additional reinforcing ribs are placed between the motor and tone arm to enhance rigidity and vibration damping.
The factory adjusts the balance of each turntable using high-precision equipment, with each unit marked with a “BALANCED” sticker to signify proper adjustment.
Power Supply and Noise Reduction
The turntable is equipped with a high-speed switching power supply, which ensures stable power delivery with minimal ripple and humming. This technology eliminates the need for large transformers and reduces mechanical vibrations. The switching frequency of over 100 kHz limits noise interference, enhancing playback clarity. Additionally, the low-noise switching circuit includes a noise detection device and error amplifier to further remove residual noise.
Tonearm and Insulators
The tonearm is crafted from lightweight, rigid aluminium and follows the traditional static-balance universal S-shape. It features a gimbal suspension and high-precision bearing for accurate record tracking. Skilled Japanese artisans manually assemble the tonearm, which includes an auxiliary weight to accommodate various pickup cartridges. For vibration control, the SL-1300G uses special silicon rubber insulators, providing both high damping characteristics and long-term reliability. Additionally, the turntable includes gold-plated phono terminals for detachable cables and a metal shielding construction inside the case to minimise external noise interference.
Turntable Section
Drive Method: | Direct Drive |
Motor: | Brushless DC motor |
Turntable Speeds: | 33-1/3, 45, and 78* rpm |
* The turntable speed will be 78.26 rpm when set to 78 rpm. | |
Pitch Adjustment Range: | ±8% and ±16% |
Starting Torque: | 0.32 N・m (3.3 kgf・cm) (2.86 lbf-in) |
Build-up Characteristics: | 0.7 s. from standstill to 33-1/3 rpm |
Braking System: | Electronic brake |
Wow and Flutter: | 0.025% W.R.M.S. |
Turntable Platter: | Aluminum diecast, Brass, and Rubber |
Diameter: | 332 mm (13-5/64") |
Weight: | Approx. 3.6 kg (7-15/16 lbs) (Including a rubber sheet) |
Tonearm Section
Type: | Static Balance |
Effective Length: | 230mm |
Overhang: | 15mm |
Tracking Error Angle: | Within 2° 32' (outer groove of 30cm/12" record) Within 0° 32' (inner groove of 30cm/12" record) |
Offset Angle: | 22° |
Arm Height Adjustment Range: | 0 - 6mm |
Stylus Pressure Adjustment Range: | 0 - 4g (Direct Reading) |
Headshell Weight: | Approx. 7.6g |
Applicable Cartridge Weight Range: | Without auxiliary weight: 5.6 - 12.0g With head shell: 14.3 - 20.7g With small auxiliary weight: 10.0 - 16.4g With head shell: 18.7 - 25.1g With big auxiliary weight: 14.3 - 19.8g With head shell: 23.0 - 28.5g |
Cartridge Mounting Dimension: | 12.7 mm (1/2") interval |
Head Shell Terminal Lug: | 1.2mmφ 4-pin terminal lug |
Terminals
PHONO (Pin Jack): | x 1 |
EARTH TERMINAL: | x 1 |
General
Power Supply: | AC220-240 V, 50/60 Hz |
Power Consumption: | For UK: |
10 W (ON) | |
0.3 W (OFF) | |
For other countries: | |
10 W (Power ON) | |
0.3 W (Power OFF) | |
Dimensions: (W x H x D) | 453 x 173 x 372 mm |
Weight: | Approx. 13.0kg |
Operating Temperature Range: | 0℃ to +40℃ |
Operating Humidity Range: | 35% to 80% RH (no condensation) |
Accessories: | Turntable, Turntable sheet, Dust cover, EP record adaptor, Balance weight, Auxiliary weight, Head shell, Overhang gauge, Screw set for cartridge, PHONO cable, PHONO earth lead, AC mains lead, Screw set for turntable, Owner's Manual |
Free NEXT DAY DELIVERY
Free next working day delivery
When you spend over £75. We will send you a tracking number where DPD will give a one hour delivery window. Services available Monday to Friday (excluding public holidays) to most mainland UK addresses for in stock items ordered before our cut-off time at 3:30pm. Terms apply.
Free Saturday delivery
When you spend over £299. We will send you a tracking number where DPD will give a one hour delivery window. Services available to most mainland UK addresses for in stock items ordered before our cut-off time on Friday 3pm. Terms apply.
Free Sunday delivery
When you spend over £299. We will send you a tracking number where DPD will give a one hour delivery window. Services available to most mainland UK addresses for in stock items ordered before our cut-off time on Saturday 2pm. (sunday delivery location) Terms apply.
CLICK & COLLECT
Some of our manufactures request for there items not to be sold on line for these items our delivery service may not be available in curtain locations so please call to order 01925 828009
Remote locations
Standard next day delivery is free for all orders to most UK mainland addresses. All other delivery prices are determined by the destination, the service chosen and the value and weight of your order. Addresses in the Scottish Highlands, offshore, Northern Ireland & Ireland may incur additional delivery costs, depending on the items ordered.
Choose options
Testimonials
Bought some Rega Kyte speakers, stands and chords from DB online and they were incredibly helpful. They updated my delivery address very quickly and recommended a longer cut of cables which they did complimentary. They also noticed I didn’t order with banana plugs so called me back to double check, which I did mean to order. When i had some issues connecting my cables and speakers, I called for some advice which they happily gave. Excellent service and next day delivery to London. Thoroughly recommend.
James F.
Probably one of the best companies in the world. They had to special order in the speakers which took a fair bit of time, which is totally understandable, but they kept in touch with me throughout the entire time with updates (even on a Sunday!!!) and once the speakers were with them, they were dispatched and arrived next day.
The entire sound system that I purchased is insanely good, but still not as good as Doug Brady HiFi!
Guy H.
I have recently purchased a HiFi package with Doug Brady and I could not be more thrilled with my experience with them.
When I walked into the store, I was made to feel welcome and was introduced to some of the products. I produces a list of specific items I was interested in and John was really helpful in showing me these items. He set the system up so I could experience it, he made some suggestions which made the package even better. Nothing seemed too much trouble for him, he was very knowledgeable about the products and gave great advice. I didn't feel pressured to buy anything, or didn't feel that he was upselling at any point. I left with an amazing package and I'd like to thank John and the team for the fantastic experience.
Kaylay L.